A quick guide to hazmat trucking. (2024)

Transporting hazardous materials adds a layer of complexity to the trucking job. The cargo could harm people, animals, or the environment. However, by exercising caution, understanding the materials, and using fleet management tools, hazmat trucking can be a rewarding field to be in. Fleet managers need to know all about managing the risks. This guide can help.

What is hazmat trucking?

Hazmat trucking is the transport of hazardous materials, which could be anything from hazardous gasses or poisons to waste or radioactive materials. The cargo could cause harm either on its own or when it comes into contact with air, flame, water, or other chemicals.

Although driving safely is always a priority, it’s critically important in hazmat trucking. Drivers hauling a hazmat load have the added stress of ensuring they are following the additional regulations for this type of cargo. Plus, they may need to avoid certain routes to detour around hazmat restricted areas. Fleet managers can make this easier for drivers by providing training and optimized routing.

Finding success in hazmat trucking also requires understanding the different classifications of cargo. More on that next.

Hazmat classifications explained

The Department of Transportation (DoT) has established nine classes of hazardous material. The Federal Motor Carrier Safety Administration (FMCSA) requires drivers to have hazardous material placards on the vehicle that correctly identify the hazmat category. Examples for each class to follow.

Hazmat Class 1: Explosives

There are six categories within this category depending on the type of explosion involved. This class includes dynamite, gun powder, and fireworks. The different categories within this class reflect whether there are mass explosions, projections, or fire considerations as well as the level of sensitivity.

Hazmat Class 2: Gases

This class is divided into three categories:

  • Flammable gases (2.1) that burn readily in air
  • Non-flammable gases (2.2), which can include liquified or cryogenic liquids (e.g. helium)
  • Poisonous gases (2.3) such as carbon monoxide

Hazmat Class 3: Flammable Liquids

These liquids could ignite if they’re near an ignition source and at a temperature of 140 degrees or less. This class includes gasoline, ethanol, and many paints and solvents.

Hazmat Class 4: Flammable Solids

There are three divisions in this class. An example of a flammable solid (4.1) could be matchsticks. A spontaneously combustible material (4.2) and solid materials that are dangerous when wet (4.3) are also included.

Hazmat Class 5: Oxidizing Substances/Organic Peroxides

Class 5 contains oxidizers (5.1), which can contribute to the combustion of other materials. Hydrogen peroxide and silver nitrate are examples. The class also includes organic peroxides (5.2), which have an oxidizer and an organic fuel. These are hazardous because they can release heat and energy at dangerous levels.

Hazmat Class 6: Toxic and Infectious Substances

Toxic substances may sound like Hollywood disaster film, but 6.1 covers any toxic or poisonous material (solid or liquid) presumed toxic to humans. Category 6.2 covers infectious substances.

Hazmat Class 7: Radioactive Substances

Uranium or plutonium qualify for class 7, but there are other radioactive materials such as X-ray equipment.

Hazmat Class 8: Corrosive Materials

Think battery acid or degreasers — materials with the ability to eat away at skin or other materials due to their acid (low pH) or base (high pH) levels.

Hazmat Class 9: Miscellaneous Hazardous Materials

Miscellaneous hazardous materials involve anything else that poses a threat while on the road. These materials can’t be classified in the previous sections, so they’re listed in Class 9.

Hazmat regulations for trucking

Hazmat trucking has its own set of regulations from the FMCSA:

  • Vehicles carrying hazardous materials are required to carry shipping papers containing the hazmat class and ID number (or name).
  • The vehicle should be marked on all four sides with hazmat placards. The ID number must be on the placards. Otherwise, the placard name is needed.
  • For containers with bulk packages inside, if the required ID number marking isn’t visible, the transport vehicle must be marked on each side and each end.
  • The sub-category of the classification should be on the placard (e.g. 5.1 or 5.2).

Hazmat drivers must also be over the age of 21 and meet certain education requirements. While on the road, hazmat drivers must also wear personal protective equipment (PPE). Additionally, hazmat drivers need a hazmat endorsement on their commercial driver’s license (CDL).

Best practices for hazmat transportation

Hazmat driving is desirable and more competitive. Your drivers for hazmat transportation are typically more experienced. Still, there are some best practices that can help improve the hazmat transportation experience:

  • Plan the route with drivers to avoid fines and protect public safety, driver safety, and the environment.
  • Coach drivers to be vigilant and aware of their surroundings when driving or delivering hazardous cargo.
  • Standardize inspection processes and proactively maintain vehicles for optimal service.
  • Connect new drivers with experienced mentors to pass on industry know-how.

Hazmat truck driver responsibilities

Hazmat truck driving adds responsibilities. Not only are drivers handling hazmat cargo, but they must adjust routes based on certain restrictions. Plus, many of the materials are time-sensitive, so prompt delivery can be an added stressor.

This type of cargo also requires detailed records. Additionally, there are safety protocols to follow to ensure driver safety as well as safe loading, unloading, and/or disposal.

How to become a hazmat driver

Trucking companies will often pay a premium for hazmat trucking jobs. To get hired you’ll need to show you’re attentive to detail and a careful driver. You’ll need a clean driving record, and most fleets will be looking for you to have a couple years of non-hazardous material truck driving first.

You’ll also need the hazmat endorsement, which requires TSA background checks, a written test, and a DOT medical exam.

In addition to the hazmat endorsement (H), you’re also likely to need a tanker endorsement (X) on your CDL. The X endorsement also requires its own knowledge test.

Wondering if it’s worth it? The Bureau of Labor Statistics anticipates a seven percent growth rate in hazardous materials removal work from 2020 to 2030. Glassdoor reports the median total pay of a Class Z CDL Driver/HazMat Tanker as $83,053 annually in 2022. For comparison, the average dry van driver earns $53,714 annually, according to ZipRecruiter.

The dangers associated with hazmat trucking jobs

Hazmat truck drivers are transporting explosives, gasses, corrosive materials, poisons, and more. These could be potentially harmful in the event of an accident. Depending on the hazmat class, there’s also the chance of a criminal element trying to take control of that cargo in transit. Truckers and Training describes this as “a small, but terrifying, possibility.”

How to keep hazmat truck drivers safe and efficient with Motive

Whether your trucks are hauling oil and gas or a hazardous toxin, your fleet can benefit from real-time visibility from GPS tracking with a best-in-class fleet management software solution. Fleet managers can keep tabs on hazmat vehicles and notify customers of any delays.

Motive’s platform also supports the hazmat trucking best practices. Planning the best route is easier with an artificial intelligence-powered workflow tool. Optimize routes and operational planning with the data you need to pick the best driver for each load. Both fleet managers and drivers can receive real-time dispatch updates and deploy navigation within the Motive App.

Drivers can also be more aware of their actions with AI-powered dash cams. The Motive AI Dashcam can instantly alert drivers of unsafe driving. The cameras also help fleet managers by providing HD video evidence to prove innocence and avoid third-party liability. Plus, the dash cam footage is automatically analyzed and contextualized to flag drivers who would benefit from additional coaching.

Motive’s software supports asset health as well. Fleets can correlate ELD compliance vehicle inspection data with maintenance history to increase vehicle uptime and reduce repair costs with preventative maintenance.

Hazmat transportation has some added challenges. Motive’s software solution can help simplify things for both drivers and fleet managers. Request a demo today.

A quick guide to hazmat trucking. (2024)

FAQs

What are the basic clues for HazMat? ›

These include container shapes, placards, and other markings and labels, and environmental signs. For example, smoke or clouds of gas, dead or injured animals or people, and discolored buildings and vegetation may be indicators of a hazardous materials release.

How many questions are on the hazardous? ›

You will be required to pass a HAZMAT Knowledge Test, which consists of 30 questions.

What is the correct order for HazMat? ›

An easy way to remember this sequence is to refer to the acronym “ISHP”: Identification Number, Shipping Name, Hazard Class or Division, and Packing Group. If a technical name is required, it must be placed in parentheses and listed after the Proper Shipping Name or Basic Description.

What are the 2 hazmat signal words? ›

There are only two words used as signal words, “Danger” and “Warning.” Within a specific hazard class, “Danger” is used for the more severe hazards and “Warning” is used for the less severe hazards.

What is the 4 digit code for hazmat? ›

Four-digit numbers ranging from 0004-3534 are called United Nations (UN) numbers. They help identify hazardous international cargo traveling in the United States. Goods that aren't classified or regulated by the United Nations receive North American (NA) numbers.

What does RQ mean in hazmat? ›

Column 2 of TABLE 1, entitled "Reportable quantity (RQ)", contains the reportable quantity (RQ), in pounds and kilograms, for each hazardous substance listed in Column 1 of TABLE 1.

What is the hazmat question? ›

At acceptance, ask the question, "Does this parcel contain anything liquid, fragile, perishable, or potentially hazardous?" • Look out for parcels with items that could potentially contain fuel, and advise mailers of the mailing limitations (see Exhibit 1 below).

What four key questions should you ask before handling any hazardous material? ›

Workers should be able to answer these questions for every hazardous product they work with:
  • What are the hazards of the product?
  • How do I protect myself from those hazards?
  • What do I do in case of an emergency?
  • Where can I get further information?

What 7 entries are required on all hazmat shipping papers? ›

Information on the shipping papers must include:
  • The identification number, identified in the Hazardous Materials Table.
  • The proper shipping name, identified in the Hazardous Materials Table.
  • The hazard class.
  • The packing group, identified in Roman numerals, when required.
  • The total quantity of hazardous materials.

What is the 3 30 rule for hazmat? ›

The 3/30 Rule in its simplest form finds that a first responder utilizing taped-up turn out gear with SCBA has sufficient protection for a 3 minute reconnaissance (Appendix B) in Page 12 12 an unknown nerve agent environment and sufficient protection for 30 minutes to conduct rescue operations in areas containing known ...

What are the 5 phases of hazmat? ›

In identifying where hazardous materials are found in your community, consider the five phases of a hazardous material's “life”—production, transportation, storage, use, and disposal. At each phase, the possibility exists either for controlled, careful use or for short-sighted mismanagement.

How many classes are there in HazMat? ›

A visor card guide for state and local law enforcement officials illustrating vehicle placarding and signage for the following nine classes of hazardous materials: 1) Explosives, 2) Gases, 3) Flammable Liquid and Combustible Liquid, 4) Flammable Solid, Spontanaeously Combustible and Dangerous When Wet 5) Oxidizer and ...

How many hours is HazMat awareness? ›

Compliance with OSHA Standards

The 4-Hour HazMat Awareness Training and the 16-Hour HazMat Operations Course are meticulously designed to adhere to the Occupational Safety and Health Administration (OSHA) regulation 29 CFR 1910.120.

What are the 7 clues to the presence of hazardous materials? ›

The relative risk to a person increases as the number increases:
  • Occupancy/location.
  • Container shapes.
  • Markings and colors.
  • Placards and labels.
  • Shipping papers.
  • Detection devices.
  • Your senses.

What are the six main detection clues to look for at a hazmat incident? ›

The six main detection clues at a HazMat incident are: type of materials manufactured, stored, or used; cylindrical tanks or rounded ends; names, numbering, or stenciling; diamond-shaped images; documents listing chemical name, number, and type; and vapor clouds and hissing noises.

Which is a clue for detecting hazardous substances? ›

Senses - Senses include sight, smell, hearing, touch, taste, and sensations such as skin, eye, or respiratory irritation, etc. Sense are frequently the clue that provides an initial indication of a hazardous materials accident or incident.

What are the 7 basic shipping description on hazmat shipping paper? ›

If required, prepare a shipping paper that contains a description of the hazmat, including the UN identification number, proper shipping name, hazard class, and packing group, quantity, number and type of packages, emergency contact information, and a shipper's certification.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Melvina Ondricka

Last Updated:

Views: 6081

Rating: 4.8 / 5 (68 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Melvina Ondricka

Birthday: 2000-12-23

Address: Suite 382 139 Shaniqua Locks, Paulaborough, UT 90498

Phone: +636383657021

Job: Dynamic Government Specialist

Hobby: Kite flying, Watching movies, Knitting, Model building, Reading, Wood carving, Paintball

Introduction: My name is Melvina Ondricka, I am a helpful, fancy, friendly, innocent, outstanding, courageous, thoughtful person who loves writing and wants to share my knowledge and understanding with you.